Creality K2 Pro Combo

Creality K2 Pro with one CFS unit for four-colour printing (16 with more CFS). 60 °C heated chamber, 300 × 300 × 300 mm build, 300 °C hardened nozzle and two AI cameras. Listed at PrototypeBD for buyers in Bangladesh. Browse more 3D printers.

Key features

One CFS for four-colour printing, ready to grow to 16

The K2 Pro Combo includes the K2 Pro and one CFS (Creality Filament System) unit. It keeps four spools sealed, reads Creality RFID filament, refills automatically when a spool runs out and lets you choose slots on the printer screen. Up to four CFS units give 16 colours; the extra units are sold separately.

Active chamber heating up to 60 °C

This is the main step up from the K2. The K2 Pro holds its chamber at a stable temperature of up to 60 °C, which Creality gives as the chamber temperature for ABS and ASA. A warm chamber helps prevent corner warping on engineering filaments such as ASA and PPA-CF. The bed reaches 110 °C.

Direct drive extruder and 300 °C hardened nozzle

A direct drive extruder with a step-servo motor feeds a quick-swap all-metal hotend with a hardened steel nozzle rated to 300 °C. Creality quotes 40 mm³/s flow (ABS at 280 °C). A run-out sensor and an automatic magnetic cutter are built into the filament path. Creality lists PLA, PETG, PET, ABS, ASA, TPU 95A, PLA-CF, PA-CF and PPA-CF.

Two AI cameras

The chamber camera watches for spaghetti failures and foreign objects on the plate and records time-lapses. A second AI camera at the nozzle tunes flow rate and pressure advance automatically and checks the waste chute for blockages. Creality lists the nozzle camera only on the K2 Pro and K2 Plus.

Smart leveling and step-servo motion

The strain-gauge nozzle probes only the area your model will use. Three FOC step-servo motors drive the X and Y axes and the extruder, rated at up to 600 mm/s and 20,000 mm/s² (typical 300 mm/s). The K2 Pro frame parts are all metal, die-cast from aluminium alloy.

Connected and ready out of the box

The K2 Pro arrives pre-assembled: fit the touch screen and follow the start-up guide for leveling and fan calibration. It has Wi-Fi and Ethernet, 32 GB storage, a built-in RFID reader for a side-mounted spool, an activated-carbon air filter and alarm sounds. Creality Print, Creality Cloud and OTA firmware updates handle slicing and remote printing.

Good for

• Designers printing large multicolour models and signs

• Workshops mixing engineering filaments and colour prints on one machine

• Print services that want sealed filament storage and AI monitoring

What's in the box

Creality states that the K2 Pro Combo includes the K2 Pro and one CFS unit; additional CFS units are sold separately. Creality does not publish a full packing list for this SKU, so PrototypeBD confirms the exact box contents with you before you pay.

Before you order

• Price: contact us for the current price. This model is listed for pre-order.

• Filament is not included unless we confirm otherwise for your unit. Spools shown in Creality's photos are for illustration. See our filament range.

• Power: Creality rates the K2 Pro for 100–240 V AC, 1300 W, so it runs on Bangladesh 220 V mains. Ask us about the plug type of the unit you receive.

• One CFS: the Combo includes one 4-spool CFS. For more than four colours you need extra CFS units.

Only need one colour? See the Creality K2 Pro. Smaller and lighter? Compare the Creality K2 Combo or K2. Browse all Creality printers and 3D printers.