Creality K2

Enclosed CoreXY 3D printer from Creality with a 260 × 260 × 260 mm build volume, step-servo motors, 300 °C hardened nozzle, smart auto leveling and a chamber camera. Single-colour; CFS-ready. Listed at PrototypeBD for buyers in Bangladesh. Browse more 3D printers.

Key features

Step-servo motion with smart leveling

Three FOC step-servo motors drive the X and Y axes and the extruder. Creality rates the K2 at up to 600 mm/s and 20,000 mm/s², with 300 mm/s as the typical speed. Before each print the strain-gauge nozzle probes only the area your model will use, so leveling is quicker and the first layer is checked where it matters.

Direct drive extruder and 300 °C hardened nozzle

The direct drive extruder feeds a quick-swap, all-metal hotend with a hardened steel nozzle rated to 300 °C. Creality quotes 40 mm³/s flow (tested with ABS at 280 °C). A run-out sensor and an automatic magnetic cutter sit in the filament path, which is what makes the CFS colour changes work.

Enclosed chamber with side cooling

The K2 is fully enclosed with active cooling and an activated-carbon air filter. It has no chamber heater (that is a K2 Pro feature); Creality lists PLA, PETG, PET, ABS and PLA-CF for it, with a 100 °C bed. An auxiliary fan on the chamber side blows onto fresh layers to improve layer bonding.

Chamber camera keeps watch

A 720p chamber camera streams to the Creality Cloud app and records time-lapses. On its K2 page Creality also shows print failure detection, which warns you about spaghetti-type failures so you can stop the job.

Quiet and ready out of the box

The K2 arrives pre-assembled: fit the touch screen, then follow the start-up guide for leveling and fan calibration. Creality says Silent Mode runs at about 45 dB thanks to the step-servo motors and balanced fans. Wi-Fi, OTA firmware updates, the 4-inch screen, 8 GB storage and Creality Print cover day-to-day use.

Good for

• Home users and students in Bangladesh who want a fast, enclosed first printer

• Makers printing PLA, PETG and ABS parts, organisers and prototypes

• Buyers who want one colour now and the option to add a CFS later

What's in the box

Creality does not publish a packing list for this SKU, so PrototypeBD confirms the exact box contents with you before you pay. This is the K2 without CFS: the multicolour CFS unit is not included.

Before you order

• Price: contact us for the current price. This model is listed for pre-order.

• Filament is not included unless we confirm otherwise for your unit. Spools shown in Creality's photos are for illustration. See our filament range.

• Power: Creality rates the K2 for 100–240 V AC (1350 W at 220 V), so it runs on Bangladesh 220 V mains. Ask us about the plug type of the unit you receive.

• No CFS: this listing is the printer only. The CFS multicolour unit is sold separately or as the K2 Combo.

Want four colours from day one? See the Creality K2 Combo with CFS. Need a bigger, heated chamber? Compare the Creality K2 Pro and K2 Pro Combo, or browse all Creality printers and 3D printers.