A 3D printing workshop and shop in Dhaka, since 2020
We sell 3D printers, laser engravers, CNC machines and filament, and we run the same kind of machines every day to print, design and cut parts for students, engineers and businesses across Bangladesh.

- Since 2020
- Started as a Bangladeshi 3D printing startup
- Aftab Nagar
- Our workshop and shop in Dhaka
- Nationwide
- Courier delivery anywhere in Bangladesh
- 1-year warranty
- Our own service on the Global (UK) Bambu Lab printers we import
Built from scratch, one print at a time
PrototypeBD was started by four university friends: Walid Mafuj, Rownak Rayhan, Shahrior Farhan and Habibur Rahman. It began with a printer they built themselves because the only one they could use had a queue of days, and it went live as a Facebook Page during the 2020 lockdown.
Today we sell the machines we know and print on them ourselves: architecture models, engineering scale models, enclosures, robot parts and one-off prototypes, with CAD design and laser cutting alongside.
four young people who started PrototypeBD, a Bangladeshi 3D printing startup
A student who wanted a 3D printer
In high school, Walid Mafuj builds tech projects at home: home automation, an RFID lock, game consoles from household parts. Josef Prusa's videos leave him wanting a 3D printer of his own.
Three friends at BRAC University
Studying electrical and electronic engineering at BRAC University, Walid teams up with Rownak Rayhan and Shahrior Farhan. Their home-automation project, Miscmation, waits days for the one university 3D printer, then wins seven tech competitions and is featured by BBC Bangla.
A printer built in a rented flat
With their prize money the three build their own printer from the open-source RepRap design, sourcing parts in Patuatuli and printing the rest at university. It prints more precisely than the university machine.
PrototypeBD goes live
Fellow students, many from architecture, start ordering prints. When the March lockdown sends everyone home, Walid and Shahrior open a Facebook Page called PrototypeBD: the official launch. By the end of the year, students studying online are ordering their models from it.
Prints for gamers and fans
Late in 2021, printed props such as the Squid Game mask and the Valorant karambit bring a whole gaming community to the page.
A fourth co-founder and the first imported printers
Habibur Rahman joins as co-founder and runs the printing work, freeing Walid for research and development. The team builds three more printers, imports its first two from China, and starts selling imported printers. After graduating that autumn, the founders go full time.
An office with its own workshop
Orders outgrow the founders' homes, and the team moves into an office with a dedicated workshop. CAD design (industrial design and packaging work for clients such as Eskayef and Bajaj Auto) and laser cutting and engraving join the printing service.
Our story becomes a business case
SAGE publishes “Building From Scratch”, a teaching case on PrototypeBD and the Bangladeshi 3D printing market, by Shadman Sakib Rummat, Faiza Tahiya and Saif Hossain.
Summarised from “Building From Scratch” (Shadman Sakib Rummat, Faiza Tahiya, Saif Hossain; SAGE Business Cases, 2025; DOI 10.4135/9781071961438).
Projects from our workshop
Engineering models for a student project
Two lattice transmission tower models, each with three cross-arms, printed for a student project on transmission-line fault detection.
3D printing: PrototypeBD (student project)

Architectural models in matte white
A theatre model with layered curved roofs and a large dome, printed in matte white for the classic white-model look architecture students ask for.
3D printing: PrototypeBD

High-rise study models without supports
Four high-rise study models for an architecture project. Their flat floor slabs printed without supports because cooling, wall orientation, material and speed were tuned for the job.
Photo: PrototypeBD

Fine detail in resin
A miniature sports bike printed on our SLA resin printer, for parts where FDM layers would be too coarse.
Photo: PrototypeBD

A Padma Bridge miniature
A road deck with lamp posts over a printed lattice truss, carried on three tapered piers: designed, printed and assembled in our workshop.
Made for Valiant Tigers; design, printing and assembly: PrototypeBD

Working machines, not only models
A complete servo-driven robotic arm, printed and assembled by PrototypeBD.
Design, printing and assembly: PrototypeBD

A 4 ft × 4 ft interchange model
The Hatikumrul Interchange presentation model pictured at the top of this page: printed road decks and loop ramps over a landscaped base with water, trees and small buildings.
Client: Roads and Highways Department (RHD), Bangladesh; 3D design, printing and finishing: PrototypeBD
Project dates are when each job was posted on our Facebook Page. Client designs are credited to their designers.
A shop for makers, and a workshop that makes
Shop machines and materials
3D printers, laser engravers, CNC machines and filament, kept in stock in Dhaka and delivered across Bangladesh.

Print, design and cut services
Send a file for an instant price, or a sketch for CAD design. Your quote arrives on WhatsApp.
- FDM 3D printingUpload STL, 3MF or OBJ for an automatic sliced price
- SLA resin printingHigh-resolution parts, miniatures and fine detail
- CAD designSketch, photo or drawing to a printable 3D model
- Laser cutting & engravingWood, acrylic, leather and paper
- CNC 2D cuttingPlywood, acrylic, MDF and foam from DXF or SVG
How a print job moves through our workshop
Send your file
Upload STL, 3MF or OBJ. STEP files are accepted and priced by hand.
Sliced, then priced
We slice the model and price it from its weight, supports and print time.
Printed and checked
Printed in-house on Bambu Lab P1S and P2S machines; large parts on a Creality Ender 5 Max.
Delivered
Packed and sent by courier anywhere in Bangladesh.
Materials
PLA, PETG, ABS, ASA, TPU, PA and PLA-CF on FDM, plus resin for fine detail.
Fit and finish
Mating parts are usually designed with 0.1 mm clearance (0.1–0.3 mm depending on material and printer). Assembly, painting and LED lighting on request.
Machines and filament we sell
We are not an authorized Bambu Lab seller. We import the Global (UK) variant and back it with our own 1-year warranty service.
The people behind the prints
Walid Mafuj
Founder & CEO
Bring us something to build
Upload an STL, 3MF or OBJ file for an automatic price, or send a sketch or photo for CAD design. Your quote arrives on WhatsApp.
House 53, Avenue 8, Block E, Aftab Nagar, Dhaka 1212
HoursSat–Thu, 10AM–8PM · Fri, Closed
Registered businessTrade Licence TRAD/DNCC/000907/2024 (Dhaka North City Corporation)
VAT registration (BIN) 006329043-0101 (National Board of Revenue)