Creality K2 Combo

Creality K2 with one CFS unit for four-colour printing (up to 16 with more CFS). Enclosed CoreXY, 260 × 260 × 260 mm build, step-servo motors, 300 °C hardened nozzle and chamber camera. Listed at PrototypeBD for buyers in Bangladesh. Browse more 3D printers.

Key features

One CFS for four-colour printing, ready to grow to 16

The Combo pairs the K2 with one CFS (Creality Filament System) unit. It holds four spools in a sealed box, reads Creality RFID filament, refills automatically when a spool runs out and lets you pick slots from the printer screen. Creality Print slices the colours. Up to four CFS units can be chained for 16 colours; the extra units are sold separately.

Step-servo motion with smart leveling

Three FOC step-servo motors drive the X and Y axes and the extruder. Creality rates the K2 at up to 600 mm/s and 20,000 mm/s², with 300 mm/s as the typical speed. Before each print the strain-gauge nozzle probes only the area your model will use, so leveling is quicker and the first layer is checked where it matters.

Direct drive extruder and 300 °C hardened nozzle

The direct drive extruder feeds a quick-swap, all-metal hotend with a hardened steel nozzle rated to 300 °C. Creality quotes 40 mm³/s flow (tested with ABS at 280 °C). A run-out sensor and an automatic magnetic cutter sit in the filament path, which is what makes the CFS colour changes work.

Enclosed chamber with side cooling

The K2 is fully enclosed with active cooling and an activated-carbon air filter. It has no chamber heater (that is a K2 Pro feature); Creality lists PLA, PETG, PET, ABS and PLA-CF for it, with a 100 °C bed. An auxiliary fan on the chamber side blows onto fresh layers to improve layer bonding.

Chamber camera keeps watch

A 720p chamber camera streams to the Creality Cloud app and records time-lapses. On its K2 page Creality also shows print failure detection, which warns you about spaghetti-type failures so you can stop the job.

Quiet and ready out of the box

The K2 arrives pre-assembled: fit the touch screen, then follow the start-up guide for leveling and fan calibration. Creality says Silent Mode runs at about 45 dB thanks to the step-servo motors and balanced fans. Wi-Fi, OTA firmware updates, the 4-inch screen, 8 GB storage and Creality Print cover day-to-day use.

Good for

• Makers printing multicolour figures, signs, keychains and gifts

• Schools and hobby clubs that want colour prints without manual filament swaps

• Buyers who want sealed, dry filament storage next to the printer

What's in the box

Creality states that the Combo version comes with one CFS unit; additional CFS units are sold separately. Creality does not publish a full packing list for this SKU, so PrototypeBD confirms the exact box contents with you before you pay.

Before you order

• Price: contact us for the current price. This model is listed for pre-order.

• Filament is not included unless we confirm otherwise for your unit. Spools shown in Creality's photos are for illustration. See our filament range.

• Power: Creality rates the K2 for 100–240 V AC (1350 W at 220 V), so it runs on Bangladesh 220 V mains. Ask us about the plug type of the unit you receive.

• One CFS: the Combo includes one 4-spool CFS. For more than four colours you need extra CFS units.

Only need one colour? See the Creality K2 without CFS. For a 300 mm heated chamber, compare the Creality K2 Pro Combo or the K2 Pro. Browse all Creality printers and 3D printers.