Creality K2 Pro

Creality K2 Pro: enclosed CoreXY 3D printer with active chamber heating to 60 °C, 300 × 300 × 300 mm build, 300 °C hardened nozzle and two AI cameras. Single-colour; CFS-ready. Listed at PrototypeBD for buyers in Bangladesh. Browse more 3D printers.

Key features

Active chamber heating up to 60 °C

This is the main step up from the K2. The K2 Pro holds its chamber at a stable temperature of up to 60 °C, which Creality gives as the chamber temperature for ABS and ASA. A warm chamber helps prevent corner warping on engineering filaments such as ASA and PPA-CF. The bed reaches 110 °C.

Direct drive extruder and 300 °C hardened nozzle

A direct drive extruder with a step-servo motor feeds a quick-swap all-metal hotend with a hardened steel nozzle rated to 300 °C. Creality quotes 40 mm³/s flow (ABS at 280 °C). A run-out sensor and an automatic magnetic cutter are built into the filament path. Creality lists PLA, PETG, PET, ABS, ASA, TPU 95A, PLA-CF, PA-CF and PPA-CF.

Two AI cameras

The chamber camera watches for spaghetti failures and foreign objects on the plate and records time-lapses. A second AI camera at the nozzle tunes flow rate and pressure advance automatically and checks the waste chute for blockages. Creality lists the nozzle camera only on the K2 Pro and K2 Plus.

Smart leveling and step-servo motion

The strain-gauge nozzle probes only the area your model will use. Three FOC step-servo motors drive the X and Y axes and the extruder, rated at up to 600 mm/s and 20,000 mm/s² (typical 300 mm/s). The K2 Pro frame parts are all metal, die-cast from aluminium alloy.

300 mm build volume with side cooling

The 300 × 300 × 300 mm volume fits a full-size helmet or a large batch of small parts in one job. An auxiliary fan on the chamber side blows onto fresh layers for better bonding when you print PLA or PETG.

Connected and ready out of the box

The K2 Pro arrives pre-assembled: fit the touch screen and follow the start-up guide for leveling and fan calibration. It has Wi-Fi and Ethernet, 32 GB storage, a built-in RFID reader for a side-mounted spool, an activated-carbon air filter and alarm sounds. Creality Print, Creality Cloud and OTA firmware updates handle slicing and remote printing.

Good for

• Engineering students and workshops printing ASA, PA-CF and PPA-CF parts

• Cosplay and product designers who need 300 mm parts in one piece

• Small print services that want camera monitoring and Ethernet

What's in the box

Creality does not publish a packing list for this SKU, so PrototypeBD confirms the exact box contents with you before you pay. This is the K2 Pro printer only: the multicolour CFS unit is not included.

Before you order

• Price: contact us for the current price. This model is listed for pre-order.

• Filament is not included unless we confirm otherwise for your unit. Spools shown in Creality's photos are for illustration. See our filament range.

• Power: Creality rates the K2 Pro for 100–240 V AC, 1300 W, so it runs on Bangladesh 220 V mains. Ask us about the plug type of the unit you receive.

• No CFS: this listing is the printer only. The CFS is sold separately or as the K2 Pro Combo.

Want four colours? See the Creality K2 Pro Combo with CFS. On a tighter budget? Compare the Creality K2 and K2 Combo (260 mm, no chamber heating), or browse all Creality printers and 3D printers.