Creality3D Printers

Creality SPARKX i8

About this product

Creality SPARKX i8 four-colour 3D printer with the QuarTeks four-channel toolhead: four filaments feed one 0.4 mm nozzle and switch colour in under a second. 260 × 260 × 255 mm build, up to 500 mm/s, AI camera.

৳60,000Preorder price

Out of stock — available to preorder

1
How pre-order works

Pay an advance online now, the rest on delivery. Checkout shows the exact amounts.

We confirm the expected arrival date with you on WhatsApp after you order.

Pre-order terms

Chat with us about this product
Chat on WhatsApp
Add to compare
Save for later
Product overview

Professional output.
Less setup, more making.

Creality SPARKX i8 four-colour 3D printer with the QuarTeks four-channel toolhead: four filaments feed one 0.4 mm nozzle and switch colour in under a second. 260 × 260 × 255 mm build, up to 500 mm/s, AI camera. Listed at PrototypeBD for buyers in Bangladesh. Browse more 3D printers.

Key features

QuarTeks: four colours, one nozzle

The i8 is built around QuarTeks, Creality's four-channel toolhead. Each of the four filaments has its own channel that runs all the way to the hotend, and the four paths share less than 1 mm before the nozzle. Instead of pulling one filament back through a long tube and pushing the next one in, the printer switches channels right at the toolhead, which Creality puts at under one second per colour change. That is where the time goes on colour-rich models with hundreds of changes, and it also cuts the purge plastic each change needs. There is still one hotend and one nozzle, so there are no nozzle offsets to calibrate between colours.

Creality SPARKX i8 QuarTeks toolhead cut-away with four filament channels merging into one nozzle

Four spools on the frame, no separate box

The four spools hang on holders on both sides of the frame, and four PTFE tubes run straight to numbered channels on the toolhead, so the i8 needs no external multicolour unit on the desk. Creality recommends keeping all four channels loaded, even for prints with fewer colours: the QuarTeks hotend uses the other channels to keep the melt-zone pressure steady. Load the same material type in every channel, for example four PLA or four PETG spools.

Side view of the Creality SPARKX i8 with two spools on the frame holder and feed tubes running to the toolhead

No prime tower mode, and what it really means

Multicolour prints can run with or without a wipe tower. In no-prime-tower mode the small amount of purge is placed inside the model where possible. Creality is clear that this is not zero waste on every print: if the model has no room for the purge, a little plastic is still discharged outside it. Slice your own model in Creality Print 7 or later to see the real filament estimate.

Quick-release hotend, 81-point leveling and AI monitoring

The hotend comes out by hand, without tools, in about five seconds (Creality figure), and a built-in cutter helps when unloading filament or removing the hotend. The i8 ships with a 0.4 mm hardened steel nozzle; Creality lists 0.2, 0.6 and 0.8 mm hotends as planned but not yet available. Before each print it runs 81-point automatic leveling with localised micro-leveling and input shaping. Creality says 13 sensors plus a 720p AI camera (up to 30 fps, with LED fill light) watch for spaghetti, build plate problems, run-out, slipping filament and empty extrusion in each of the four channels, and a run-out print can resume.

Creality SPARKX i8 from the front left showing the SPARKX toolhead, i8 side cover, touchscreen and textured PEI plate

Setup, ports and power

The i8 arrives as a printer frame and base housing that you join with the supplied screws, then you fit the two spool racks and connect the four PTFE tubes by colour. Power goes in at the back through a standard inlet with a switch. Creality rates it for 100–240 V AC, 50/60 Hz, so it runs on Bangladesh 220 V mains. There is a 2.85-inch IPS touchscreen, an RGB status light, Wi-Fi (2.4 GHz), an 8 GB microSD card and a Creality RS485 port for accessories such as the separate RFID reader.

Rear view of the Creality SPARKX i8 with the power inlet and switch and four filament spools on the side holders

SPARKX i8 or SPARKX i7?

Both have the same 260 × 260 × 255 mm build, 500 mm/s top speed, 300 °C hotend and 100 °C bed. The i7 is a single-colour printer that can add four colours with an external Creality filament system. The i8 has four colours built into the toolhead, so it suits people who print in colour most of the time. Creality says an i7 cannot be upgraded to an i8.

Good for

  • Labels, signs and name plates with readable contrasting colours

  • Personalised gifts, ornaments and tabletop accessories

  • Colour concept models and small display pieces

  • Buyers who print multicolour often and want less waiting and purge waste

What's in the box

Creality's quick start guide lists the printer frame, base housing, print plate, hex wrenches, scraper blade, power cable, a filament sample, screws, four PTFE tubes (2 × 60 cm, 2 × 80 cm), two main brackets, two bridge connectors, four spool holders, two slide buckles and the pneumatic fitting connectors. Creality says the list is for reference only, so PrototypeBD confirms the box contents of the unit you receive before you pay.

Before you order

  • Price: ৳60,000. The SPARKX i8 is listed for pre-order: pay the advance shown at checkout now and the rest before delivery.

  • Availability: Creality first sold the i8 through a crowdfunding campaign and its own store still lists it as coming soon. We confirm availability with you after you pre-order.

  • Filament: full spools are not included. Use PLA, PLA-Silk, PLA-CF or PETG, the same type in all four channels. See our filament range.

  • Power: 100–240 V AC, 50/60 Hz. Ask us about the plug type of the unit you receive.

  • Open frame: the i8 has no enclosure. Creality advises at least 30 cm of clear space around the printer.

Want four colours on the SPARKX i7 instead? See the SPARKX i7 Nano Combo. Browse all Creality printers and 3D printers.

FAQ

Creality SPARKX i8: frequently asked questions

Does the Creality SPARKX i8 have four nozzles?

No. QuarTeks gives each of the four filaments its own channel, and all four feed one hotend with one 0.4 mm nozzle. Colour changes happen at the toolhead in under a second, according to Creality.

Which filaments can the SPARKX i8 print?

Creality recommends PLA, PLA-Silk, PLA-CF and PETG, with the same material type loaded in all four channels. It also recommends keeping all four channels loaded for good print quality.

Does no prime tower mean zero waste?

No. It means a separate prime tower is not needed. If a model has no room for the purge inside it, a small amount is still pushed out beside the model.

What is the Creality SPARKX i8 price in Bangladesh?

The SPARKX i8 is listed at ৳60,000 on pre-order. Pay the advance shown at checkout to reserve one; we confirm availability with you after you order.

Price, warranty & delivery in Bangladesh

Creality SPARKX i8 price in Bangladesh is ৳60,000 at PrototypeBD, with delivery across Bangladesh in 1–3 business days.

Price in Bangladesh
৳60,000
Availability
Available on pre-order; the pre-order price above applies.
Delivery
1–3 business days anywhere in Bangladesh by courier; the delivery charge is confirmed before dispatch.
Warranty
PrototypeBD's own warranty service, handled at our workshop in Dhaka (we are not an authorised Creality reseller, so manufacturer warranty claims are not available). Ask us for the exact terms for your model before you buy, and keep your invoice and serial number for claims.
Returns
Accepted within 3 days of delivery, in store (Dhaka) or by courier; the return delivery cost is paid by the customer.

Questions & Comments

Loading comments…

Need help?

Have a technical question?

Ask about specifications, compatibility, delivery or warranty.