Creality K2 SE 4C

Creality K2 SE 4C: CoreXY 3D printer with four filament slots built in, so it prints four colours without a separate CFS box. 220 × 215 × 245 mm build volume, up to 500 mm/s, 37% smaller footprint than the K2 SE Combo. Listed at PrototypeBD for buyers in Bangladesh. Browse more 3D printers.

Key features

Four colours built into the printer

"4C" means four colours: the K2 SE 4C has four filament slots built in, with a status light for each, so it prints four-colour models without a separate filament box beside it. The spools sit on the side of the frame and feed from the top, which Creality says takes 37% less space than a K2 SE Combo placed side by side. Run-out and tangle detection and automatic filament relay are part of the system.

Die-cast metal frame

Frame parts are die-cast aluminium alloy with corner gussets and crossbeams on both sides, so the CoreXY motion stays steady at up to 500 mm/s and 20,000 mm/s² without layer shift. Creality recommends 300 mm/s for the best surface quality.

Smart auto leveling

The printer probes only the area where your model will be printed, which speeds up leveling before each job. After unboxing, a short guided setup on the touchscreen handles the self-check and calibration.

Sensors that save a print

Built-in sensors warn you when filament runs out or tangles. Power-loss recovery resumes the job where it stopped, and Skip Partial Failure lets the rest of a plate carry on if one part fails. Air printing detection and input shaping are also listed in Creality's specifications.

Easy-removal supports and open software

Print PLA models with PETG as breakaway support, or the reverse, for cleaner surfaces. Print offline from USB or over 2.4 GHz Wi-Fi; Creality OS includes an expert mode, and Creality says root access comes standard with Fluidd support. Slice in Creality Print 6.0 or newer.

Good for

• Beginners who want four-colour printing from day one

• Small desks, shops and classrooms where a side-by-side Combo will not fit

• Colourful decorative prints, name tags and gifts in PLA and PETG

What's in the box

Creality does not publish a box list for this exact SKU on its product pages. PrototypeBD confirms the box contents with you before payment.

Before you order

• Price: contact us for the current price. This model is listed for pre-order.

• Power: Creality rates it for 100–120 V / 200–240 V AC, 50/60 Hz (350 W), so it runs on Bangladesh 220 V mains. Ask us about the plug type of the unit you receive.

• Filament is not included: Creality states filaments are sold separately; spools in the photos are for illustration. See our filament range.

• Filaments: Creality lists PLA, PETG and PLA-CF for the 4C (not TPU). Spools must be 1 kg, 197–202 mm across, 52–55 mm hub, 52–68 mm wide.

Want room to grow to 16 colours? See the Creality K2 SE Combo. Single colour only: Creality K2 SE. Browse all Creality printers and 3D printers.