Creality K2 SE

Open-frame CoreXY 3D printer from Creality with a 220 × 215 × 245 mm build volume, up to 500 mm/s, quick-swap 300 °C nozzle and smart auto leveling. Ready for the CFS multicolour system, sold separately. Listed at PrototypeBD for buyers in Bangladesh. Browse more 3D printers.

Key features

Direct drive extruder with a quick-swap nozzle

The K2 SE uses a dual-gear direct drive extruder with a quick-swap nozzle, so a worn or clogged nozzle can be changed without taking the hotend apart. A run-out sensor in the extruder tracks the filament, and an automatic magnetic cutter is built in for clean filament changes once you add a CFS. The nozzle heats to 300 °C for PLA, PETG, TPU 95A and PLA-CF.

Die-cast metal frame

Frame parts are die-cast from aluminium alloy, with corner gussets and crossbeams on both sides. Creality says this keeps shaking low at its rated 500 mm/s and 20,000 mm/s² acceleration; for the best surface quality it recommends 300 mm/s.

Smart auto leveling of the print area

Before each job the printer probes only the area your model will use instead of the whole bed, which shortens the start of a print. Leveling, Z offset and fan calibration run from the touchscreen during setup, so there is no paper test.

Add colours later

The K2 SE works with Creality's CFS (Creality Filament System). One CFS holds four spools, and up to four CFS units can be connected for 16 colours. CFS units are sold separately and are not part of this listing; the K2 SE Combo includes one.

Everyday features

Power-loss recovery, input shaping, a lighting kit and Skip Partial Failure (drop one failed part from a plate and keep printing the rest) are built in. Files go over USB drive, network or Creality Cloud and are sliced in Creality Print 6.0 or newer. Creality's optional K1-series AI camera fits the K2 SE; its cable is sold separately.

Good for

• First-time buyers who want a fast printer that is ready after a short setup

• Students and makers printing PLA and PETG parts, and PLA-CF for stiffer brackets

• Buyers who plan to add multicolour printing with a CFS later

What's in the box

Creality does not publish a box list for this exact SKU on its product pages. PrototypeBD confirms the box contents with you before payment.

Before you order

• Price: contact us for the current price. This model is listed for pre-order.

• Power: Creality rates it for 100–120 V / 200–240 V AC, 50/60 Hz (350 W), so it runs on Bangladesh 220 V mains. Ask us about the plug type of the unit you receive.

• Filament: Creality's US store names this option "K2 SE (Filament*2)", which means Creality's listing includes two filament spools. Creality does not publish a box list for it, so we confirm before payment whether your unit comes with them. Otherwise see our filament range.

• Open frame: the K2 SE has no enclosure, so it is meant for PLA, PETG, TPU 95A and PLA-CF rather than ABS or nylon.

Want colour from day one? See the Creality K2 SE Combo (with one CFS) or the compact Creality K2 SE 4C. Need an enclosed printer for engineering filaments? Look at the Creality K1C (2025) or Creality K1 Max 2025. Browse all Creality printers and 3D printers.