Creality HALOT-X1 Max

Large-format Creality resin 3D printer: 13.5-inch 16K mono LCD (20 × 26 μm), 302.4 × 161.98 × 350 mm (17.1 L) build volume, 40 °C active chamber heating, four lead screws and rails, AI camera and air filtration. Listed at PrototypeBD for buyers in Bangladesh. Browse more 3D printers.

Key features

17.1 L build volume

The 13.5-inch 16K mono LCD (20 × 26 μm pixels) gives a 302.4 × 161.98 × 350 mm build volume. Creality prints a 340 mm tall figure in one piece instead of joining parts, and fills the 14-inch platform with dozens of miniatures in a single job.

Four lead screws, static platform

Four lead screws and four linear rails carry the load, which Creality says stops the 'nodding' of a single cantilever arm. As on the HALOT-X1, the build platform stays still and the light source moves, so vibration does not show up as lines on the model.

40 °C active chamber heating

The chamber heats actively up to 40 °C, so resin reacts the same way in a cool or air-conditioned room. 76-zone independent exposure with 13,000-point calibration keeps the light even across the large screen, and an ACF release film cuts release force by about 60% by Creality Lab's figure.

Quick-release vat and film

The resin vat comes out in about 3 seconds, and the release film is designed for quick replacement. A 135° side-hinged door gives wide access, and 12 CFM negative-pressure ventilation with activated carbon filtration handles fumes.

Built for small production

Eight sensors work together: heater and chamber temperature, component presence, AI camera, printer levelness, Z-axis force, RFID and liquid level. The printer is leveling-free, connects over USB and dual-band Wi-Fi (2.4 and 5 GHz), and CreFarm OS manages several printers from one screen. Slice in HALOT BOX or CHITUBOX (Lychee coming soon). The 5 L HyperFeed smart resin feeding system is optional and sold separately.

Good for

• Miniature and wargaming studios printing in batches

• Large one-piece figures, props and statues

• Small workshops prototyping footwear, elastomer and engineering resin parts

What's in the box

Creality does not publish a box list for this model on its product pages. PrototypeBD confirms the exact box contents with you before payment.

Before you order

• Price: contact us for the current price. This model is listed for pre-order.

• Resin is not a listed consumable. Prints in the photos are examples. Plan for resin, IPA or water-wash cleaner and a curing light or station, which are sold separately.

• Safety: uncured resin is an irritant. Wear the gloves and mask from the box and print in a ventilated room.

• Power: Creality lists a rated power of 1350 W (chamber heating included) but does not state the input voltage on its product pages. We confirm the voltage and plug type for Bangladesh 220 V mains before payment.

• Optional feeding system: the 5 L HyperFeed smart resin feeding system is optional on Creality's page and is not included with this listing.

• The printer weighs 34.7 kg and measures 500 × 350 × 692 mm; plan a sturdy table.

Need something smaller? See the Creality HALOT-X1 or the entry HALOT-X1 Neo. Browse all Creality printers and 3D printers.