Creality HALOT-X1

Creality resin 3D printer with a 10.1-inch 16K mono LCD (14 × 19 μm), 211.68 × 118.37 × 200 mm build volume, 92-zone exposure, up to 170 mm/h, a pre-leveled quick-release build plate and quick-release vat. Listed at PrototypeBD for buyers in Bangladesh. Browse more 3D printers.

Key features

16K mono LCD for fine detail

The 10.1-inch 16K mono LCD has a resolution of 15120 × 6230 and a 14 × 19 μm pixel size. That is fine enough for tabletop miniatures, anime figures and small display parts where surface detail matters. The build volume is 211.68 × 118.37 × 200 mm.

92-zone intelligent exposure

The honeycomb matrix light source is split into 92 zones, and the HALOT-X1 switches on light only where the layer needs it. Creality says this saves energy, improves accuracy and extends the life of the LCD. The rated light intensity is 6500 μW/cm² for 405 nm resin.

Fixed build plate, moving vat

Most resin printers lift the build plate. The HALOT-X1 does the opposite: the build plate stays still while the resin vat and the light source move, guided by two linear rails and two lead screws. This keeps each layer steady and allows a maximum speed of 170 mm/h by Creality's figure.

Quick-release plate and vat

The printer arrives pre-leveled, so there is no leveling step: unpack, add resin and print. To take prints off, twist the handles on both sides of the build plate bracket to pop out the quick-release bar and push the models off, with no scraping. The resin vat also releases quickly for cleaning and resin changes.

Quiet, steady chamber

Passive chamber thermal circulation keeps the inside temperature stable without fans or heaters, which Creality says reduces curing problems and warping. A proximity switch at the top detects when the lid is open and locks the platform for safety. Slice in HALOT BOX or CHITUBOX, and send files over USB or Wi-Fi. Resin parameter packs load from Creality Cloud or by USB drive.

Good for

• Anime figure, miniature and tabletop wargaming hobbyists

• Design studios printing detailed display models

• Makers who want a fast, pre-leveled resin printer with easy print removal

What's in the box (Creality list)

HALOT-X1 printer with tray, filter, gloves, power cable, plastic scraper, lubricant, hex keys, qualified certificate, USB drive, metal scraper, spare screws, respirator, after-sales service card and quick start guide.

Before you order

• Price: contact us for the current price. This model is listed for pre-order.

• Resin is not a listed consumable. Prints in the photos are examples. Plan for resin, IPA or water-wash cleaner and a curing light or station, which are sold separately.

• Safety: uncured resin is an irritant. Wear the gloves and mask from the box and print in a ventilated room.

• Power: Creality rates it for 100–120 V / 200–240 V AC, 50–60 Hz, so it runs on Bangladesh 220 V mains. Ask us about the plug type of the unit you receive.

• The AFU automatic resin feeding unit is not included with this listing. It comes with the HALOT-X1 Combo.

Want automatic resin feeding? Ask us about the Creality HALOT-X1 Combo. For a smaller starter printer see the HALOT-X1 Neo, or go large with the HALOT-X1 Max. Browse all Creality printers and 3D printers.