ELEGOO Jupiter 2

Large-format ELEGOO resin 3D printer with a 14-inch 16K mono LCD, 302 × 162 × 300 mm build volume, automatic resin feeding and recycling, heated tank, force-sensor auto leveling and a chamber camera. Listed at PrototypeBD for buyers in Bangladesh. Browse more 3D printers.

Key features

Big builds at 16K

The 14-inch 16K mono LCD (15120 × 6230, 20 × 26 μm XY) gives a 302 × 162 × 300 mm build volume, about 2.5 times the Saturn 4 by ELEGOO's figure. Print a full-size helmet part, a large architectural model or a plate full of miniatures in one job. ELEGOO notes that full-height prints need the tank removed to take the model out.

Automatic resin feeding and recycling

A two-way pump connects a 2 kg ELEGOO resin bottle to the tank. It tops up the tank during long prints, can return resin to the bottle, and warns you before resin runs short.

Heated tank and force-sensor leveling

The quick-lock smart tank keeps resin at 30 °C. Four independent force sensors under the platform set the first layer automatically, and manual leveling with live readings is available too.

Camera and light inside

A chamber camera with an LED light shows the print live and records time-lapses, and a mechanical sensor detects leftover resin before it can damage the LCD.

Built for long jobs

Double doors with a viewing window, a quick-swap PFA film and quick LCD replacement keep maintenance short. Wi-Fi, OTA updates, ELEGOO SatelLite and the ELEGOO Matrix app handle file transfer and monitoring. Power-loss recovery and LED overheat protection are built in.

Good for

• Cosplay, prop and helmet makers

• Architecture and product design studios printing large display models

• Print farms and miniature sellers who batch many parts per plate

What's in the box (ELEGOO list)

Jupiter 2 printer, bottle cap module, resin bottle, auto resin feeding cartridge, build plate, resin tank, USB flash drive, mask, drip tray, funnel, backup screws, gloves, scraper, auto resin feeding and recycling accessory box, power cable, tool kit and user manual. ELEGOO lists a resin bottle for the feeding system; we confirm with you whether it contains resin.

Before you order

• Price: contact us for the current price. This model is listed for pre-order.

• Plan to buy resin separately. Prints in the photos are examples. You also need IPA or water-wash cleaner and a curing light or station, which are sold separately.

• Safety: uncured resin is an irritant. Wear the gloves and mask from the box and print in a ventilated room.

• Power: ELEGOO rates it for 100–240 V AC, 50/60 Hz, so it runs on Bangladesh 220 V mains. Ask us about the plug type of the unit you receive.

• Commercial launch: ELEGOO previewed the Jupiter 2 in April 2025 and launched it on 15 April 2026.

• The printer weighs 28.9 kg (35.8 kg packed), so plan a strong, level table.

Need finer detail in a smaller printer? See the ELEGOO Saturn 4 Ultra 16K. Browse all ELEGOO printers and 3D printers.