Creality mBox

Creality mBox is a compact, fully enclosed 3D printer made for children: 153 × 153 × 153 mm build, no heated bed, 3.97-inch touchscreen, CoreXY, auto leveling and an AI camera. Creality says it is built for ages 6–16. Listed at PrototypeBD for buyers in Bangladesh. Browse more 3D printers.

Key features

Kids print from the screen

Creality designed the mBox so children can run it themselves. On the 3.97-inch full-colour touchscreen they pick a model and tap Print, without connecting a phone. An RGB light bar along the top shows the status: progressing white while printing, blinking yellow when paused, a colour burst when done and blinking red on an error.

Closed chamber and an unheated plate

Creality lists five protection features: a fully enclosed chamber that keeps the hot nozzle and moving parts behind the door, a door-open alert, cold-bed printing, activated carbon filtration and low-odour PLA. The build plate is never heated, which Creality says makes removing prints easier for children. The door-open response can be set to no action, alert only, or alert and pause with a notification in the parents' app.

CoreXY motion and auto leveling

Inside, the mBox uses a CoreXY motion system with vibration compensation for steadier prints, and auto leveling to help the first layer stick. Creality quotes 200 mm/s typical speed with Hyper PLA, 300 mm/s maximum, and a low-noise mode of 46 dB or less.

AI camera that alerts parents

The built-in AI camera watches for warping, foreign objects and spaghetti failures and sends an alert to the app. Parents can check progress remotely and replay time-lapse videos.

From photos to models

With Creality's CubeMe and SnapForm tools, children can turn a photo of family or a pet, or their own drawing, into a printable model. The Creality Park app has curated models and STEAM courses; Creality Park Studio is a PC modelling tool for older kids who want to design their own.

Good for

• Families with children who draw, build and make things (Creality says ages 6–16)

• School STEAM rooms and clubs in Bangladesh that want a closed, compact printer

• Small figurines, keychains and toys up to 153 mm in each direction

What's in the box

Creality has not published a full packing list for the mBox. Its product page says one 250 g spool of rainbow (gradient) PLA is included. We confirm the exact contents with you before you pay.

Before you order

• Price: contact us for the current price. This model is listed for pre-order.

• Power: Creality rates the mBox for 100–240 V AC, 50/60 Hz, so it runs on Bangladesh 220 V mains. Ask us about the plug type of the unit you receive.

• Grown-up help: the nozzle still reaches 250 °C behind the door. We suggest an adult sets it up and keeps an eye on young children while it prints.

• Filament: Creality recommends Hyper PLA and CR-Silk. The mBox does not support the CFS or RFID filament. See our filament range.

• Availability: Creality currently sells the mBox only through TikTok Shop in the US. Ask us before ordering and we will tell you whether we can source it.

For an older child or a family printer with a bigger build volume, see the Creality Ender-3 V3 Neo. Browse all Creality printers and 3D printers.