Creality Ender-3 V4 Combo

Creality's Ender-3 V4 in its Combo listing: 220 × 220 × 235 mm build volume, up to 500 mm/s, full-auto calibration, a unibody die-cast gantry, quick-swap nozzle, 47 dB quiet mode and CFS support for up to 16 colours. Listed at PrototypeBD for buyers in Bangladesh. Browse more 3D printers.

Key features

Unibody die-cast gantry

The Ender-3 V4 drops the usual bolted gantry for one seamless die-cast loop, which Creality says cuts shaking and wobble. The whole printer weighs 6.8 kg yet reaches 500 mm/s and 12,000 mm/s², with input shaping to smooth out layer lines.

Magnetic cover and quick-swap nozzle

The toolhead cover is magnetic: pull it off in seconds, then swap to a smaller nozzle for fine detail or a larger one for faster printing. Before printing, the V4 runs auto Z-offset, auto leveling and input shaping calibration with a single tap, and loads and unloads filament for you.

One-piece heatbed and PEI plate

A new one-piece heatbed heats quickly and evenly for a smooth first layer. It reaches 100 °C and carries a PEI build plate.

Quiet enough for a bedroom desk

Creality rates the V4 at 47 dB in Quiet Mode (Creality lab data). It gets there with quiet motors, dynamically balanced fans, a low-friction linear rail and a sound-absorbing chassis.

Multicolour with CFS

The Ender-3 V4 connects to up to four Creality CFS units for 16 colours, with RFID filament recognition and tangle detection when a CFS is used. Creality's own pages state "CFS sold separately", while the Combo is pictured with one CFS and listed with combo dimensions of 838 × 396 × 456 mm, so confirm with us what your box contains. Other features: privacy camera for monitoring and time-lapses, lighting kit, power loss recovery, auto filament relay, 8 GB storage, and Creality OS with Fluidd UI, root access and expert mode. Slice in Creality Print 6.0 or newer.

Good for

• First-time buyers who want one-tap setup and a printer that looks good on a desk

• Students and home users who need a quiet printer

• Makers who plan to add CFS multicolour later

What's in the box

Creality does not publish a packing list for the Ender-3 V4 Combo, and its pages disagree on whether a CFS unit is part of the Combo. PrototypeBD confirms the box contents with you before payment.

Before you order

• Price: contact us for the current price. This model is listed for pre-order.

• Filament is not included. Creality does not list filament in the box. Spools shown in the photos are for illustration. See our filament range.

• Power: Creality rates the Ender-3 V4 for 100–240 V AC, 50/60 Hz (900 W), so it runs on Bangladesh 220 V mains. Ask us about the plug type of the unit you receive.

• The printer alone measures 396 × 359 × 456 mm and weighs 6.8 kg.

• Do not assume a CFS unit is included until we confirm the box contents for your order.

Compare the compact Creality Ender-3 V3 Neo, or go large with the Ender-3 V3 Mega. Browse all Creality printers and 3D printers.