Delivery across Bangladesh. Timing and charges are confirmed before dispatch.
1 / 2
Bambu Lab3D Printers
Bambu Lab AMS HT
About this product
Bambu Lab AMS HT is a sealed single-spool AMS that dries at up to 85 °C for engineering filaments such as PA, PC and carbon-fibre grades, with its own front display, mains power cord and RFID filament reading. Filament is not included. Choose the Global or Chinese version, then contact PrototypeBD for price and pre-order.
Contact for price
VersionGlobal Version
Out of stock
Select your preferred option and contact us for pricing and availability.
Chat with us about this product
Chat on WhatsApp- Delivery to all 64 districtsby courier in 1–3 days
- Cash on deliveryor bKash, Nagad, Rocket & cards
- 3-day returnsin store or by courier
- Warranty serviceat our Dhaka workshop
Add to compare
Save for later
Professional output.
Less setup, more making.
The Bambu Lab AMS HT is a narrow, sealed single-spool Automatic Material System built for high-temperature drying. It holds one 1.75 mm spool, dries it at up to 85 °C and feeds it to the printer automatically, so engineering filaments stay dry from storage to nozzle. Filament is not included — the black spool in the second photo is for illustration only.
85 °C drying for engineering filament
A heater, fan and NTC sensor dry the rotating spool at up to 85 °C — enough, per Bambu Lab, for every material on the AMS 2 Pro list including PA, PC and carbon-fibre grades. Electro-magnetic air vents, a gasket seal and desiccant keep the box dry, a lid-open sensor stops heating when opened, and the front display shows humidity, temperature and remaining drying time. Over-temperature protection with a physical failsafe and a UL 94 V-0 housing are built in.
Power: its own mains cord
The AMS HT always draws its drying power from the mains through the included power cord (100–240 V AC, 50/60 Hz, about 150 W average). It also needs the 6-pin Bambu Bus cable to a powered-on printer to dry and feed.
Bypass for flexible and fibre filaments
Besides automatic feeding, a separate bypass outlet passes TPE, generic TPU, Bambu TPU 95A, Bambu PET-CF and other CF/GF filaments straight to the printer. Through the bypass there is no automatic feed or retract, and drying while printing is not available.
Compatibility and what you may also need
H2D / H2C / H2S, X2D: up to 8 AMS HT (plus up to 4 AMS 2 Pro); buffer built in or included. Larger setups need a 4-in-1 PTFE adapter.
P2S: up to 4 AMS HT; the standalone P2S needs the P2S Filament Buffer.
X1 / P1 series: up to 4 units; one unit needs a Filament Buffer, more need an AMS Hub (non-combo printers also need the PTFE tube coupler and 4-pin cable).
A1 series: needs the AMS Hub – A1 Series and printer firmware 01.07.00.00 or later.
Tell us your printer and we will confirm the parts. Source: Bambu Lab AMS compatibility guide.
What is in the box
According to Bambu Lab: AMS HT, desiccant, PTFE tubes (2 × 263 mm, 1 × 900 mm), 6-pin Bambu Bus cable and a power cord for the AMS HT. Bambu Lab does not state the plug type per region; ask us to confirm the plug of the unit you order.
Global Version or Chinese Version?
Bambu Lab publishes a single AMS HT specification with universal 100–240 V input, and we found no official hardware difference or region lock for the AMS HT itself. The two options show the supply channel: Global Version from Bambu Lab's international channel, Chinese Version from the mainland-China channel. Bambu Lab states that it does not support cross-regional service, so warranty service follows the region of purchase. Ask us which version is available before ordering.
Price and pre-order
Available on pre-order and priced on request. Message PrototypeBD on WhatsApp for today's price and expected arrival; we confirm the delivery date with you before you pay. See 3D printers in Bangladesh or browse 3D printing filament.
Specifications source: Bambu Lab AMS HT.
Specifications
Spool Slots1 (sealed)
Filament Diameter1.75 mm
Feed MotorBrushless assist motor
- Spool Size
- Width 50–68 mm, diameter 197–202 mm
- Drying
- Active, up to 85 °C, rotating spool
- Moisture Control
- Electro-magnetic air vents, gasket seal, desiccant
- Display
- Front display: humidity, temperature, remaining drying time
- Safety
- Lid-open sensor, over-temperature protection with physical failsafe, UL 94 V-0 housing
- Filament ID
- RFID (Bambu Lab filament)
- Features
- Auto refill, remaining filament estimate, auto drying settings, filament odometry
- Inlet
- Ceramic
- Bypass Outlet
- For TPE, generic TPU, Bambu TPU 95A, Bambu PET-CF, CF/GF filaments (no auto feed)
- Supported Materials (auto feed)
- Same as AMS 2 Pro: PLA, PETG, ABS, ASA, PET, PA, PC, PP, POM, HIPS, dried PVA/BVOH, Bambu CF grades, TPU for AMS
- Power Input
- 100–240 V AC, 50/60 Hz (own power cord, included); about 150 W average
- Compatible Printers
- Bambu Lab printers; buffer, hub or adapter depends on printer
- Max Units
- Up to 8 on H2 series / X2D, up to 4 on P2S, X1, P1, A1 series
- Dimensions
- 114 × 280 × 245 mm
- Net Weight
- 1.21 kg
- Housing
- PC/PA
- Included
- AMS HT, desiccant, PTFE tubes (2×263, 1×900 mm), 6-pin Bambu Bus cable, power cord
- Not Included
- Filament, buffer, hub
- Versions
- Global Version, Chinese Version
Our own warranty service at our Dhaka workshop (not a manufacturer warranty). Keep your invoice and serial number for claims.
Our team confirms every order before shipment.
Bambu Lab AMS HT: frequently asked questions
How many spools does the AMS HT hold and is filament included?
One spool (width 50–68 mm, diameter 197–202 mm). Filament is not included; the spool in the photo is for illustration only.
What is the difference between the AMS HT and the AMS 2 Pro?
The AMS 2 Pro holds four spools and dries at up to 65 °C. The AMS HT holds one spool, dries at up to 85 °C for PA, PC and CF filaments, has its own front display and mains power cord, and adds a bypass outlet for flexible and fibre filaments.
Which printers can use the AMS HT and what else is needed?
Per Bambu Lab: up to 8 on the H2 series and X2D, up to 4 on P2S, X1, P1 and A1 series. X1/P1 need a buffer or AMS Hub, A1 series needs the AMS Hub – A1 Series, the standalone P2S needs the P2S buffer, and larger setups need a 4-in-1 PTFE adapter. It cannot be used with the AMS lite on A1 printers. Tell us your printer to confirm.
How do I get the price and pre-order the AMS HT?
It is priced on request. Pick the Global or Chinese Version and message PrototypeBD on WhatsApp or request a quote; we confirm today's price, the plug type and the expected arrival before you pay.
Questions & Comments
Loading comments…
Need help?
Have a technical question?
Ask about specifications, compatibility, delivery or warranty.